Turn the Ramps You Own Into 6.6 Degree Ramps

These are add on inclines, not ramps. They fit in front of 56″ or 67″ Race Ramps and do not include the ramps themselves. Pick the version that matches the ramps you already own.

You bought the ramps, the car got lower, and now the nose touches on the way up. Replacing a good set of ramps to buy back a few degrees is an expensive answer to that problem.

An XTender is a long, shallow wedge that sits in front of the ramp so the tire starts climbing four feet earlier. The combined approach drops to 6.6 degrees, gentler than every ramp in the Race Ramps line.

The 12″ wide version is 45″ long and fits 56″ ramps. The 14″ wide version is 45″ long and fits 67″ ramps, including the Race Ramps XT. Both weigh 10 lbs each.

Sold in pairs. If you have not bought ramps yet, the 72″ two stage ramps open at 6.8 degrees on their own. See all low profile car ramps.

Race Ramps XTenders shown in front of a car ramp

Benefits of the XTenders

The gentlest approach Race Ramps offer

6.6 degrees is shallower than the 72 inch two stage ramp at 6.8 and well under the XT at 10.8. If a car will not climb anything, this is the combination to try.

Keeps the ramps you already paid for

Far cheaper than replacing a good set of 56 or 67 inch ramps because the car dropped an inch. You are buying the missing few degrees, not starting over.

No lift height sacrificed

The usual way to get a shallower climb is to lift less. This keeps the full height of your existing ramps and buys the angle back with length instead.

Only when you need it

Leave them off for the daily and put them down for the low car. Ten pounds each means moving them in and out of the way is not a job you avoid.

Matched widths, no overhang

12 inches for the 56 inch ramps and 14 inches for the 67 inch ramps, so the tire tracks straight from one onto the other with no step or edge at the joint.

Grips instead of sliding away

The traction coating matters more on an extender than anywhere, because the tire meets it first and pushes forward. Foam holds on epoxy and sealed concrete without marking. Made in the USA with a one year warranty.

Race Ramps XTenders Specifications
Model	RR-EX-12	RR-EX-14
Fits	56″ Race Ramps	67″ Race Ramps
Length	45″	45″
Width	12″	14″
Height at the Joint	2.67″	2.67″
Combined Approach Angle	6.6 degrees	6.6 degrees
Weight	10 lbs each, 20 lbs per pair	10 lbs each, 20 lbs per pair
Sold As	Pair, two XTenders. Ramps not included
Manufacturer	Race Ramps
Material	Expanded foam with traction coating
Colour	Black
Origin	Made in the USA
Warranty	1-year manufacturer warranty \| 30-day satisfaction guarantee

XTender Frequently Asked Questions

Do I get ramps with this?

No. This is the pair of extenders only. They are useless on their own and need 56 or 67 inch Race Ramps in front of them. If you do not own a set yet, call us on +1 903-364-2960 and we will quote the pair together.

Which version do I need?

Match it to your ramps. The 12 inch wide XTender is for 56 inch Race Ramps. The 14 inch wide is for 67 inch Race Ramps, which includes the XT and the XT two piece. They are not interchangeable, so check the model number on your ramps before ordering.

Will they fit any other Race Ramps?

Race Ramps specify 56 and 67 inch ramps only. Portable Pit Stop and 16 inch Restyler ramps take a different extender with a fold. Tell us which ramps you have and we will confirm which part you need.

How much extra floor space do I need?

About four extra feet in front of each ramp, so roughly nine feet of total run once the ramp itself is counted. In a standard garage that usually means pulling the car well back before you start.

Does the joint between them cause a bump?

The XTender is cut to meet the ramp face at matching height and width, so the tire rolls through the transition rather than stepping up. Set them square and pushed together, and drive up slowly the first time to check the alignment.

Not sure which ramps you have? Talk to a MECHVANTA specialist.

Call +1 903-364-2960 Request a Quote Browse Car Ramps

ramp extension

Race Ramps XTenders for 56 and 67 Inch Car Ramps, 6.6 Degree Approach

Not sure which equipment fits your shop?